THERMOSEAL WATERPROOF SEALANT
Waterproof your embroidery!This heat-activated film even seals your needle punctures!
It is now possible to embroider on waterproof or water-repellent fabrics without compromising their waterproof properties. Just apply THERMOSEAL to the back of your embroidery and water
and moisture will not penetrate the fabric through the tiny embroidery needle punctures. Rain gear, outdoor jackets, functional clothing can be embroidered and everybody stays dry-use on work clothes e.g. for road construction, gardening and for all outdoor jobs.
Cut a piece of THERMOSEAL 2-3 cm larger than the embroidery design.
Place THERMOSEAL onto wrong side of embroidered fabric, adhesive side facing down (the adhesive coating faces out on roll, slightly glossy look).
Seal with heat press
Temperature: 266°F – 300°F (130°C – 150°C)
Pressure: medium pressure
Time: 10 – 15 sec.
For maximum adhesion, allow THERMOSEAL to set for 48 hours after pressing, before administering any washing tests.
Testing is necessary to ensure the adhesiveness of the film. Just press a small piece of Thermoseal to the back of the fabric before embroidering. If the film
sticks to the fabric, start with the described process.
Thickness: 0,19 mm
rolls: 50 cm x 10 m, 25 cm x 10 m
Dispatch and packing size:
1 single roll